dōTERRA Diffuser | Onyx Volo | doTERRA Diffuser

Description

The beautiful doTERRA Volo™ Ultrasonic Diffuser comes in onyx and marble finishes, perfect for any room in the home or office. The Volo has a handcrafted polyresin stone top with a custom diamond pattern and features optional light settings: light-free, warm and bright amber. This unique diffuser has a customisable output with multiple time settings – allowing you to customise the release of CPTG Certified Pure Tested Grade™ essential oils.

Primary Benefits

• One-, three-, and six-hour settings, even when using the highest mist output
• Up to 14 hours on lowest mist output
• Reaches up to 28 square metres
• Auto-dimming timer light
• Optional, ambient light settings: light-free, warm, or bright amber

Filling Your Diffuser

Use clean, room-temperature tap water. Make sure the water level does not exceed the water mark. Add 5–12 drops of doTERRA essential oils. You can add more oil for a stronger scent. Experiment with the amount of oil you use and find what works best for you.

*See diffuser manual for cautions and instructions.

Cleaning Your Diffuser

Cleaning is a necessary step to ensure that oil residue doesn’t build up in your machine, preventing it from working properly. Periodically, it is a good idea to run your diffuser through a cleaning cycle. If you use your unit every day, then running a cleaning cycle monthly is a good idea. To do so, do the following:

1. Fill your diffuser half way with clean water.
2. Add 10 drops of white vinegar.
3. Let the diffuser run for about 5 minutes to allow the water-vinegar mixture to disperse throughout the unit and clean it.
4. Drain the diffuser completely.
5. Using a cotton swab dipped in vinegar, clean the tight spots and corners of the diffuser.
6. Rinse with clean water.
7. Use a dry cloth to wipe the diffuser and dry it thoroughly.